ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
· Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV
· Large span lengths and the largest span is over 1000m
· The design life span is 30 years
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on variou.
All Dielectric Self-Supporting Fiber cable complies with Standard IEEE P 1222 as well as IEC 60794-1.
|
|
|
G.652 |
G.655 |
50/125μm |
62.5/125μm |
|
|
@850nm |
|
|
Less than or equal to 3.0 dB/km |
Less than or equal to 3.0 dB/km |
|
@1300nm |
|
|
Less than or equal to 1.0 dB/km |
Less than or equal to 1.0 dB/km |
|
|
@1310nm |
Less than or equal to 0.00 dB/km |
Less than or equal to 0.00dB/km |
|
|
|
|
@1550nm |
Less than or equal to 0.00 dB/km |
Less than or equal to 0.00dB/km |
|
|
|
|
@850nm |
|
|
Greater than or equal to 500 MHz·km |
Greater than or equal to 200 MHz·km |
|
|
@1300nm |
|
|
Greater than or equal to 500 MHz·km |
Greater than or equal to 500 MHz·km |
|
|
|
|
{{0}}.200±0.015NA |
{{0}}.275±0.015NA |
||
|
Less than or equal to 1260nm |
Less than or equal to 1480nm |
|
|
||
Baj popilè:
Pwochen
AJOUNEOu ka renmen tou
Voye rechèch